beachy door knockers
The most common designs during these times were of human and animal faces and the workmanship of the early iron door knockers were so elaborate that they could be compared with the most-polished sculptures. The main objective of a door knocker is to let the residents of a house know that someones in the door as well as save the knuckles of visitors from being bruised or blemished. Some were crafted for decorative purposes and the most common designs were made of iron pewter brass or stainless steel. These were made to withstand all outdoor elements as well as to remain durable for years.
Knockers were common and practical in Dickens era but theyve since become replaced by the electric doorbell as the standard alert. Some people use them as decorative ornaments but unlike the knockers from the mid-1800s they serve no practical purpose. Doorways and entrances help define the architectural style of the rest of the structure and any elegance bestowed upon them sets a house apart from its neighbors. While the porch is a gathering place a quality door knocker is the focal point of the entryway. Door knockers dont have a written history but as long as there have been doors there have been alerts that signal a visitor.
Most Popular This Week
This is also true of gargoyles which have similar caricatured faces in order to prevent spirits and ghosts from entering the house. There were also good luck knockers which were thought to have magical or healing properties and were used to encourage good luck into the home. These door knockers utilized a motif of good luck charms such as horse-shoes stars suns and flowers. The popular hand shaped knocker is often seen in Muslim countries and was believed to symbolize the Hand of Fatima which protected the house from evil. It was also thought to indicate that the occupants of that house were followers of the Muslim faith.
The holes being small due to smaller diameter mounting hardware is easily fixed with a drill. If the holes are to far apart or to close this is another matter. The distance between the holes is called the Bolt Center or BC dimension. There is a reason for this seemingly odd name. You want the bolt to go through the center of the hole so this is the point that you would mark the door to be drilled. The problem you run into when replacing an existing door knocker is the holes are already drilled through your door. On the outside the holes can be covered by the knocker itself but on the inside they are exposed.