black fox door knocker
Some classic door knocker designs are installed in such a manner that holes are drilled through the door and a hardware piece from the inside holds the knocker in its place. Some classic knocker designs do not need to have the holes drilled through the door as these are instead screwed into the surface of the doors exterior. Traditional door knockers serve both practical and decorative purposes however it best helps to distinguish your house from the neighbors. You need to know that its always the door that the visitor first sees therefore why not make your doors look classy and extra special through the installation of these lovely pieces? I devote a great deal of time studying door knockers.
The finish should match the rest of the hardware. Door knockers not only come in many finishes they are available in many types of metal. The most stable metal and probably the most common is brass. Brass is easy to machine and cast into shapes. It polishes into a bright gold like finish or satins easily and is easy to maintain. Brass also electroplates readily. This allows it to be nickel or copper plated to simulate pewter and bronze finishes. Because brass is non ferrous it will not rust. It will tarnish though for this reason a good lacquer finish is needed or your purchase will look terrible in a very short time.
Most Popular This Week
This material has a long life and is available in different creative designs. The rear mounting is done by drilling the door thus the knocker is firmly fixed on it. The styles you choose is a personal affair as it brings out your own attributes. You should however choose a knocker that will look natural on your door. You can renew the look of your front door by installing a new knocker or replacing the old one along with old knobs deadbolts kick plates doorbell and your mail slot. Door knockers have been important symbols throughout history and have been mentioned in a lot of metaphors.
The door knocker itself will cover the existing holes. New ones can be made without distracting from the appearance of the door. The old holes should be filled with putty in to prevent moisture from getting into the door. Second is the through the door method. This method uses mounting hardware that passes through holes in the door to secure it from the inside. This one presents more challenges when it comes to replacement. The most obvious is the matching of the holes drilled through your door to the new door knocker. The holes need to match and be large enough to handle the hardware for the new knocker.