brass pineapple door knocker
There is nothing visible on the inside when surface mounting is used. If this is the first installation of a door knocker on this door either method may be used. If you are replacing an existing door knocker that has a through the door mount you will have the existing holes in the door to consider. Is it engraved? What are you going to engrave? Is your purchase engraveable? These questions need to be thought out before you purchase. It is advisable to purchase your door knocker from the same company that is going to engrave it. This way you should receive good advice as to what can be done and for how much money. You must also consider that engraving could damage the surface.
There really is no limit in this genre because the knocker is meant to reflect the homeowners unique personality. Installation FAQ If you are installing a new door knocker the best choice is a rear mounted knocker made from solid materials such as brass or iron. These will be more resistant to damage over time and offer a wider option of intricate designs. Rear mounting does require the door to be drilled for installation but this prevents theft of the knocker and ensures it will not fall off or break away from the door. If you are replacing an existing knocker it is important to measure the pre-existing holes and choose a new knocker carefully.
Most Popular This Week
If lacquered or plated the engraving process can cut through and expose the base metal below. An engraved door knocker should be engraved before the plating or lacquering process. A door knocker makes a wonderful gift or is a great addition to your own home. Careful shopping and little research will go a long way in getting the best value. Are you about to replace an older doorknocker with a new one? Perhaps you are looking for a different style or finish. In any case shopping for a door knocker can be a frustrating task. There is not only the choice of style and finish you must match or cover the impressions and holes left from the previous one.
In many instances the hardest part of replacing a door knocker is finding a suitable replacement. Matching the finish or style is not so difficult as is matching the mounting methods. There are two common methods of installing a door knocker. Surface mounting and through the door mounting. Both methods use common household tools. Other than that they are distinctly different. First is the surface mount method. This option uses wood screws that pass through the door knocker and into the door. This is the easiest method for replacement. The screws do not have to line up perfectly with the existing holes in the door.