colby smith door knockers
Some classic door knocker designs are installed in such a manner that holes are drilled through the door and a hardware piece from the inside holds the knocker in its place. Some classic knocker designs do not need to have the holes drilled through the door as these are instead screwed into the surface of the doors exterior. Traditional door knockers serve both practical and decorative purposes however it best helps to distinguish your house from the neighbors. You need to know that its always the door that the visitor first sees therefore why not make your doors look classy and extra special through the installation of these lovely pieces? I devote a great deal of time studying door knockers.
One thing that you should also consider is the theme of your house or its architectural designs so that the style and design of chrome door knockers that you are planning to buy on line must be appropriate with the design of your or theme of your house. With the advent of online marketing you can now have a full access of the wide choices of the different styles and themes of designer chrome collection that ranges from door knobs and door handles to hinges and accessories that will make your entryways more appealing and attractive. One advantage of door knockers made of chrome over the traditional one is its modern look and durability.
Most Popular This Week
The finish should match the rest of the hardware. Door knockers not only come in many finishes they are available in many types of metal. The most stable metal and probably the most common is brass. Brass is easy to machine and cast into shapes. It polishes into a bright gold like finish or satins easily and is easy to maintain. Brass also electroplates readily. This allows it to be nickel or copper plated to simulate pewter and bronze finishes. Because brass is non ferrous it will not rust. It will tarnish though for this reason a good lacquer finish is needed or your purchase will look terrible in a very short time.
It can be difficult to find a new door knocker with the same BC dimension. Especially if the original one has been there for many years. There is no standard for the BC dimension. The BC for the most part is determined by the design of the knocker. The mounting lugs used to attach the hardware are usually placed at a thicker portion of the casting. This is to give them more strength. Sometimes you have to settle for a replacement that is close. If the two BCs are within 1/4 or 3/8 inch of each other you can usually enlarge the holes in the door a bit to make the fit. If you are lucky the existing mounting hardware will cover the enlarged holes.