cool door knockers
If not a larger washer will usually do the trick. If the replacement door knocker BC dimension is not even close one of the existing holes can be used but the second matching hole must be drilled through the door for the mounting. This leaves the other previous hole to cover up. If puttying and repainting is not an option I have used a third mounting hardware bolt and epoxy it into the unused hole. This gives the appearance on the inside that three bolts are used on this door knocker. This looks natural and is easy to do. The outside portion of the hole is covered by the door knocker but should still be filled with putty to prevent future problems with moisture. With a little luck you will find a matching door knocker.
This material has a long life and is available in different creative designs. The rear mounting is done by drilling the door thus the knocker is firmly fixed on it. The styles you choose is a personal affair as it brings out your own attributes. You should however choose a knocker that will look natural on your door. You can renew the look of your front door by installing a new knocker or replacing the old one along with old knobs deadbolts kick plates doorbell and your mail slot. Door knockers have been important symbols throughout history and have been mentioned in a lot of metaphors.
Most Popular This Week
This is also true of gargoyles which have similar caricatured faces in order to prevent spirits and ghosts from entering the house. There were also good luck knockers which were thought to have magical or healing properties and were used to encourage good luck into the home. These door knockers utilized a motif of good luck charms such as horse-shoes stars suns and flowers. The popular hand shaped knocker is often seen in Muslim countries and was believed to symbolize the Hand of Fatima which protected the house from evil. It was also thought to indicate that the occupants of that house were followers of the Muslim faith.
The finish should match the rest of the hardware. Door knockers not only come in many finishes they are available in many types of metal. The most stable metal and probably the most common is brass. Brass is easy to machine and cast into shapes. It polishes into a bright gold like finish or satins easily and is easy to maintain. Brass also electroplates readily. This allows it to be nickel or copper plated to simulate pewter and bronze finishes. Because brass is non ferrous it will not rust. It will tarnish though for this reason a good lacquer finish is needed or your purchase will look terrible in a very short time.