deer door knocker
Pay close attention to what the door knocker is made of. Some manufacturers get away with making low quality zinc or pot metal castings look good for a short time using plating techniques. The problem with these is the good looks do not last. Soon the plating is chipping and pealing away and corrosion is taking over. What type of mounting is needed? Most door knockers employ either through the door mounting or surface mounting. Through the door mounting involves drilling holes through the door. The mounting hardware passes through these holes and attaches to the door knocker on the outside. On the inside decorative nuts are used to secure the door knocker to the door. Surface mounting uses screws to attach the door knocker to the door.
Its not surprising that most homeowners and real estate businesses preferred to use the chrome door knockers when it comes to adorning their doors. Also knockers that are made of chrome is considered to be cheaper compared to brass and other metals. The fact that chrome door knockers are most favored because of its modern concepts and its ability to resist any corrosion due to its chromed outer layer it is definitely a prominent home accessories that will make every houses unique and with a touch of elegance. Chrome door knockers are an item of door furniture purchased to provide a functional focal point to front doors.
Most Popular This Week
In many instances the hardest part of replacing a door knocker is finding a suitable replacement. Matching the finish or style is not so difficult as is matching the mounting methods. There are two common methods of installing a door knocker. Surface mounting and through the door mounting. Both methods use common household tools. Other than that they are distinctly different. First is the surface mount method. This option uses wood screws that pass through the door knocker and into the door. This is the easiest method for replacement. The screws do not have to line up perfectly with the existing holes in the door.
If not a larger washer will usually do the trick. If the replacement door knocker BC dimension is not even close one of the existing holes can be used but the second matching hole must be drilled through the door for the mounting. This leaves the other previous hole to cover up. If puttying and repainting is not an option I have used a third mounting hardware bolt and epoxy it into the unused hole. This gives the appearance on the inside that three bolts are used on this door knocker. This looks natural and is easy to do. The outside portion of the hole is covered by the door knocker but should still be filled with putty to prevent future problems with moisture. With a little luck you will find a matching door knocker.