door knocker and peephole
The first known knockers were made out of wrought iron. These simple ornaments consisted of a thick ring and a plate which were used in the 17th and 18th centuries throughout North America and Europe. Human faces (not ghastly like Jacob Marley) an animal faces were popular designs that are still used today. The craftsmanship on some of these knockers was elaborate enough to compare to the most-polished sculpture. Basically the purpose is to save the knuckles of visitors. Although they mainly serve as decoration they are still made of brass pewter iron or stainless steel to be durable enough to withstand outdoor elements. Plus they must be heavy enough to make a sound when they are tapped against a door. Cast iron styles have been favorites for a long time for their simplicity and sturdiness. They are also good for complimenting a Western theme. Pewter is another popular material.
They are hand crafted using solid brass that matches with most of other door accessories. The door knockers are a sight to behold and they offer effective knocking services. Doctors door knockers A while ago these knockers were used as a symbol of profession associated with the home occupant. However it has changed over time and now used as a classic accessory on most doors. these doors come in different sizes that range between 6 to 8 inches. Traditional door knockers For people who will not want the knocker to attract a lot of attention on their front door a simple classic knocker will just do the trick.
Most Popular This Week
It can be difficult to find a new door knocker with the same BC dimension. Especially if the original one has been there for many years. There is no standard for the BC dimension. The BC for the most part is determined by the design of the knocker. The mounting lugs used to attach the hardware are usually placed at a thicker portion of the casting. This is to give them more strength. Sometimes you have to settle for a replacement that is close. If the two BCs are within 1/4 or 3/8 inch of each other you can usually enlarge the holes in the door a bit to make the fit. If you are lucky the existing mounting hardware will cover the enlarged holes.
Urn door knockers can be found that are mounted to the door by one of two methods. One method uses screws that pass through the knocker and screw into the door. The other method uses bolts or other hardware that goes entirely through the door. Either method works well on wooden doors but the through the door method works best on other doors. It seems that I have answered my own question. The urn door knocker is popular for many good reasons the least of which is that they really look great on the entrance way to a home. The selection of a door knocker may be a bit more difficult than you imagine.