Cabinet Door Pulls Vintage Door Pulls 2 Inch Drawer Pulls Cupboard Handles Cabinet Drawer Hardware Vintage Drawer Pulls

Tuesday, September 18th 2018. | Door Knocker

Cabinet Door Pulls Vintage 2 Inch Drawer Cupboard Handles Hardware Knocker Style

Most Popular This Week

irish claddagh door knocker

irish claddagh door knocker

door knocker and peephole

door knocker and peephole

polished chrome ring door knocker

polished chrome ring door knocker

cast iron door knockers antique

cast iron door knockers antique

boxer dog door knocker
boxer dog door knocker
french door knocker
french door knocker

There is nothing visible on the inside when surface mounting is used. If this is the first installation of a door knocker on this door either method may be used. If you are replacing an existing door knocker that has a through the door mount you will have the existing holes in the door to consider. Is it engraved? What are you going to engrave? Is your purchase engraveable? These questions need to be thought out before you purchase. It is advisable to purchase your door knocker from the same company that is going to engrave it. This way you should receive good advice as to what can be done and for how much money. You must also consider that engraving could damage the surface.

Especially if you are purchasing a gift. You may not know exactly what you want. The decor of the home should be considered. Door knockers come in many styles and finishes. You would not place an ultra modern style door knocker on a colonial style home. Many traditional styles do not fit in well with modern houses. If your purchase is for a wedding gift or housewarming gift and you may not know where the door knocker will wind up. In this case there are many styles available that are universal. If not certain of the final location it is best to stay simple. Do not get to fancy. A simple style goes with most decors.

Most Popular This Week

versace door knocker

versace door knocker

mayer mill brass door knockers

mayer mill brass door knockers

magnetic mount door knocker

magnetic mount door knocker

brass lobster door knocker

brass lobster door knocker

brass dragonfly door knocker
brass dragonfly door knocker
black pineapple door knocker
black pineapple door knocker

The holes being small due to smaller diameter mounting hardware is easily fixed with a drill. If the holes are to far apart or to close this is another matter. The distance between the holes is called the Bolt Center or BC dimension. There is a reason for this seemingly odd name. You want the bolt to go through the center of the hole so this is the point that you would mark the door to be drilled. The problem you run into when replacing an existing door knocker is the holes are already drilled through your door. On the outside the holes can be covered by the knocker itself but on the inside they are exposed.

Gallery of door knocker style drawer pulls

Tagged: drawer pulls and knobshardware pullsvintage cabinet pullsantique handlesantique dresser pullsdoor knocker cabinet pullring pullunique door knobsantique hardware pullsfurniture knobs