fox door knocker
If not a larger washer will usually do the trick. If the replacement door knocker BC dimension is not even close one of the existing holes can be used but the second matching hole must be drilled through the door for the mounting. This leaves the other previous hole to cover up. If puttying and repainting is not an option I have used a third mounting hardware bolt and epoxy it into the unused hole. This gives the appearance on the inside that three bolts are used on this door knocker. This looks natural and is easy to do. The outside portion of the hole is covered by the door knocker but should still be filled with putty to prevent future problems with moisture. With a little luck you will find a matching door knocker.
A knockers is not only a functional device but at the same time it can be a stylish and decorative focal point that could attract your visitors attention. Although it may just consist of a fitting with metal ring chrome door knockers is a perfect ornate for elegant doors. However before you decide to buy chrome door knockers for your house it is very important that you determine its purpose first. Whether it is just for aesthetic reasons or more on functional. Or you can also have both functional and stylish knockers based on your taste and personal preference.
The finish should match the rest of the hardware. Door knockers not only come in many finishes they are available in many types of metal. The most stable metal and probably the most common is brass. Brass is easy to machine and cast into shapes. It polishes into a bright gold like finish or satins easily and is easy to maintain. Brass also electroplates readily. This allows it to be nickel or copper plated to simulate pewter and bronze finishes. Because brass is non ferrous it will not rust. It will tarnish though for this reason a good lacquer finish is needed or your purchase will look terrible in a very short time.
The classic urn design has many areas that are conducive to ornamentation. Of course one of the most popular is the plain polished finish with no ornamentation at all. Most urn designs are perfectly suited for engraving. The common shape offers an excellent engraving area centering the hinge location of the clapper. This area is usually a pleasant rectangular shape that will hold a name or address nicely. Many manufacturers also design an engraving area onto the clapper. This shape can be a square or an oval depending on the manufacturer. The clapper area usually looks good whether it is engraved or not.