Cat Door Knocker Entry Door Knockers Anchor Door Knocker Wired Doorbell Chime Lion Door Knocker Cool Door Knockers
Most Popular This Week
If not a larger washer will usually do the trick. If the replacement door knocker BC dimension is not even close one of the existing holes can be used but the second matching hole must be drilled through the door for the mounting. This leaves the other previous hole to cover up. If puttying and repainting is not an option I have used a third mounting hardware bolt and epoxy it into the unused hole. This gives the appearance on the inside that three bolts are used on this door knocker. This looks natural and is easy to do. The outside portion of the hole is covered by the door knocker but should still be filled with putty to prevent future problems with moisture. With a little luck you will find a matching door knocker.
The urn door knocker is versatile and looks good on most modern day homes. It possesses a universal appeal that seems to fit in nicely with most architecture. It is available in many sizes varying from a small 4" height or less to very large 12" high. The size selection would be determined by the doorway that the door knocker is to be mounted on and the budget allowed. Some urn door knockers incorporate eye viewers as these fit in this design well. The eye viewer may be situated at the approximate center of the door knocker or it might be located at the top. When at the top the eye viewer usually replaces the upper installation hardware. The addition of the eye viewer provides the additional safety factor of being able to see who is at your door.
Most Popular This Week
Pay close attention to what the door knocker is made of. Some manufacturers get away with making low quality zinc or pot metal castings look good for a short time using plating techniques. The problem with these is the good looks do not last. Soon the plating is chipping and pealing away and corrosion is taking over. What type of mounting is needed? Most door knockers employ either through the door mounting or surface mounting. Through the door mounting involves drilling holes through the door. The mounting hardware passes through these holes and attaches to the door knocker on the outside. On the inside decorative nuts are used to secure the door knocker to the door. Surface mounting uses screws to attach the door knocker to the door.