Door Knocker With Peephole Circular Door Knocker Doorbell Knocker Brass Knocker Antique Door Knockers Chrome Anchor Door Knocker
Most Popular This Week
The door knocker itself will cover the existing holes. New ones can be made without distracting from the appearance of the door. The old holes should be filled with putty in to prevent moisture from getting into the door. Second is the through the door method. This method uses mounting hardware that passes through holes in the door to secure it from the inside. This one presents more challenges when it comes to replacement. The most obvious is the matching of the holes drilled through your door to the new door knocker. The holes need to match and be large enough to handle the hardware for the new knocker.
Some classic door knocker designs are installed in such a manner that holes are drilled through the door and a hardware piece from the inside holds the knocker in its place. Some classic knocker designs do not need to have the holes drilled through the door as these are instead screwed into the surface of the doors exterior. Traditional door knockers serve both practical and decorative purposes however it best helps to distinguish your house from the neighbors. You need to know that its always the door that the visitor first sees therefore why not make your doors look classy and extra special through the installation of these lovely pieces? I devote a great deal of time studying door knockers.
Most Popular This Week
Pay close attention to what the door knocker is made of. Some manufacturers get away with making low quality zinc or pot metal castings look good for a short time using plating techniques. The problem with these is the good looks do not last. Soon the plating is chipping and pealing away and corrosion is taking over. What type of mounting is needed? Most door knockers employ either through the door mounting or surface mounting. Through the door mounting involves drilling holes through the door. The mounting hardware passes through these holes and attaches to the door knocker on the outside. On the inside decorative nuts are used to secure the door knocker to the door. Surface mounting uses screws to attach the door knocker to the door.