ring door knocker
If not a larger washer will usually do the trick. If the replacement door knocker BC dimension is not even close one of the existing holes can be used but the second matching hole must be drilled through the door for the mounting. This leaves the other previous hole to cover up. If puttying and repainting is not an option I have used a third mounting hardware bolt and epoxy it into the unused hole. This gives the appearance on the inside that three bolts are used on this door knocker. This looks natural and is easy to do. The outside portion of the hole is covered by the door knocker but should still be filled with putty to prevent future problems with moisture. With a little luck you will find a matching door knocker.
The finish should match the rest of the hardware. Door knockers not only come in many finishes they are available in many types of metal. The most stable metal and probably the most common is brass. Brass is easy to machine and cast into shapes. It polishes into a bright gold like finish or satins easily and is easy to maintain. Brass also electroplates readily. This allows it to be nickel or copper plated to simulate pewter and bronze finishes. Because brass is non ferrous it will not rust. It will tarnish though for this reason a good lacquer finish is needed or your purchase will look terrible in a very short time.
Most Popular This Week
This will give you a frame of reference for what size you would like to use. A knocker is a wonderful way to add new beauty to any door. Replace other old and worn hardware with beautiful replacements pieces including the door knob deadbolt kick plate doorbell and mail slot. A complete entryway set can be created with a common theme or finish. Ask questions and search for high quality materials to ensure durability. The entryway of the home is the most prominent feature guests and homeowners will see and a worthwhile investment. Door knocker is not only a beautiful accessory on the front gate but also serves as a reflection of to the visitors.
Urn door knockers can be found that are mounted to the door by one of two methods. One method uses screws that pass through the knocker and screw into the door. The other method uses bolts or other hardware that goes entirely through the door. Either method works well on wooden doors but the through the door method works best on other doors. It seems that I have answered my own question. The urn door knocker is popular for many good reasons the least of which is that they really look great on the entrance way to a home. The selection of a door knocker may be a bit more difficult than you imagine.