schlage magnetic door knocker
If lacquered or plated the engraving process can cut through and expose the base metal below. An engraved door knocker should be engraved before the plating or lacquering process. A door knocker makes a wonderful gift or is a great addition to your own home. Careful shopping and little research will go a long way in getting the best value. Are you about to replace an older doorknocker with a new one? Perhaps you are looking for a different style or finish. In any case shopping for a door knocker can be a frustrating task. There is not only the choice of style and finish you must match or cover the impressions and holes left from the previous one.
If not a larger washer will usually do the trick. If the replacement door knocker BC dimension is not even close one of the existing holes can be used but the second matching hole must be drilled through the door for the mounting. This leaves the other previous hole to cover up. If puttying and repainting is not an option I have used a third mounting hardware bolt and epoxy it into the unused hole. This gives the appearance on the inside that three bolts are used on this door knocker. This looks natural and is easy to do. The outside portion of the hole is covered by the door knocker but should still be filled with putty to prevent future problems with moisture. With a little luck you will find a matching door knocker.
Most Popular This Week
These were also heavy enough to make a sound when they were tapped against the door. Door knockers made from cast iron have remained fashionable and must-have items because they were sturdy yet simple pieces. Door knockers fashioned out from pewter which is actually an alloy is often viewed as a popular ingredient for making decorative objects since these are generally easy to produce and also retain a significantly elegant feel and texture. Copper is also a good material for making door knockers. This material is famous for withstanding the natural elements because it does not rust.
The classic urn design has many areas that are conducive to ornamentation. Of course one of the most popular is the plain polished finish with no ornamentation at all. Most urn designs are perfectly suited for engraving. The common shape offers an excellent engraving area centering the hinge location of the clapper. This area is usually a pleasant rectangular shape that will hold a name or address nicely. Many manufacturers also design an engraving area onto the clapper. This shape can be a square or an oval depending on the manufacturer. The clapper area usually looks good whether it is engraved or not.