Posted in: Door Stop

magnetic door stop installationmagnetic door stop installation

To protect your walls and your ears put an end to the incessant slamming and install door stoppers or bumpers! Continue reading to learn which door stoppers and bumpers are
Posted in: Door Stop

gatehouse door stop installationgatehouse door stop installation

What is a Rigid Stop? A rigid door stop is a common style that screws directly into the trim of the wall and has a rubber tip at the end
Posted in: Door Knocker

irish door knockerirish door knocker

In olden times there were two different hand-knockers one male and one female as it was considered inappropriate for the woman of the house to open the door to a
Posted in: Door Knocker

brass pineapple door knockerbrass pineapple door knocker

In many instances the hardest part of replacing a door knocker is finding a suitable replacement. Matching the finish or style is not so difficult as is matching the mounting
Posted in: Door Knocker

iron door knockeriron door knocker

Some classic door knocker designs are installed in such a manner that holes are drilled through the door and a hardware piece from the inside holds the knocker in its
Posted in: Door Knocker

crab door knockercrab door knocker

Although the popularity of specific designs changes over time there are lovely patterns that are always a classic and welcome addition to any entryway set. Lions and Animals Animal door
Posted in: Door Knocker
cast iron door knockercast iron door knocker
Copper in turn oxidizes which protects it from rust and ages gracefully unlike other metals. These qualities make copper a good material for door knockers making them stronger and more
Posted in: Door Knocker
dragon door knockerdragon door knocker
As mentioned above as-well as being a functional device they can also be added to front doors to provide a stylish focal point that is pleasing on the eye. When
Posted in: Door Knocker

gargoyle door knockergargoyle door knocker

Pay close attention to what the door knocker is made of. Some manufacturers get away with making low quality zinc or pot metal castings look good for a short time