Posted in: Door Stop

door hinge door stopdoor hinge door stop

Instead go to your nearest home depot and look for the most chic and stylish door stopper for your bifold doors. In this Article I will take a look at
Posted in: Door Knocker

baldwin brass door knockerbaldwin brass door knocker

Copper in turn oxidizes which protects it from rust and ages gracefully unlike other metals. These qualities make copper a good material for door knockers making them stronger and more
Posted in: Door Knocker

brushed nickel door knockerbrushed nickel door knocker

In many instances the hardest part of replacing a door knocker is finding a suitable replacement. Matching the finish or style is not so difficult as is matching the mounting
Posted in: Door Knocker

oil rubbed bronze door knockeroil rubbed bronze door knocker

These home pieces were especially the rave during medieval periods until the 18th and early 19th centuries. Sadly these iconic home pieces have now been replaced by the electric doorbell;
Posted in: Door Knocker

antique brass door knockerantique brass door knocker

It is often mentioned that while a homes porch serves as focal gathering point for residents a traditional door knocker serves as the focal piece of the homes entryway. There
Posted in: Door Knocker

bee door knockerbee door knocker

Especially if you are purchasing a gift. You may not know exactly what you want. The decor of the home should be considered. Door knockers come in many styles and
Posted in: Door Knocker
fox door knockerfox door knocker
The holes being small due to smaller diameter mounting hardware is easily fixed with a drill. If the holes are to far apart or to close this is another matter.
Posted in: Door Knocker
michael healy door knockersmichael healy door knockers
Be aware that this very often is not the case. Remember that if your door knocker is solid brass is may be easier to simply refinish the existing one. Choosing
Posted in: Door Knocker

black door knockerblack door knocker

The holes being small due to smaller diameter mounting hardware is easily fixed with a drill. If the holes are to far apart or to close this is another matter.